(TD08-CEX11) TitanTest Helium Leak Detector, Cart Mounted Model, 8 CFM External Dry Scroll Pump, Electric Operated External Valve Manifold with Filter, 120 VAC Power

Features

• Three vacuum test modes: gross, fine, and ultra

• Auto-calibration with built-in helium calibrated leak standard

• Helium and hydrogen background suppression

• Audio alarm with variable pitch

• Flexible I/O to interface with external vacuum pumps and helium charge system

• Powerful software for semi-automatic and fully automatic test (AutoTest) modes

• Long-life yttria coated iridium filament

 

Component

Wet Pumping Technology

Dry Pumping Technology

Minimum detectable helium leak rate (ultra fine vacuum mode)

<5 x 10-12 atm.cc/sec

Minimum detectable helium leak rate (sniffing mode)

5 x 10-8 atm.cc/sec

Maximum inlet pressure

25 mbar

Inlet helium pumping speed 
(ultra fine mode)

2.5 L/sec

Roughing pump capacity

3.5 CFM / 14 CFM* / 28 CFM*

8 / 16 CFM

Inlet test port configuration

NW25

Detectable gases

He4, He3, and H2

Start-up time

< 3 minutes

Response time

< 0.5 seconds

Ambient operating temperature

50° F to 96° F

Operating voltage (single phase)

115/230 VAC, 50/60 Hz

Approx. weight (bench-top model)

100 lbs.*

62.5 lbs.**

Approx. dimensions (bench-top model)

22" L x 18" W x 12" H*

22" L x 18" W x 12" H**

Interface

RS232 or RS 485, Analog Output, Discrete I/O

SPECIFICATIONS
COMPONENT WET PUMPING
TECHNOLOGY
DRY PUMPING
TECHNOLOGY
Minimum detectable helium leak rate
(ultra fine vacuum mode) <5 x 10-12 atm.cc/sec
Minimum detectable helium leak rate
(sniffing mode) 5 x 10-8 atm.cc/sec
Maximum inlet pressure 25 mbar
Inlet helium pumping speed
(ultra fine mode) 2.5 L/sec
Roughing pump capacity 3.5 CFM / 14 CFM* / 28 CFM* 8 / 16 CFM
Inlet test port configuration NW25
Detectable gases He4, He3, and H2
Start-up time < 3 minutes
Response time < 0.5 seconds
Ambient operating temperature 50° F to 96° F
Operating voltage (single phase) 115/230 VAC, 50/60 Hz
Approx. weight (bench-top model) 100 lbs.* 62.5 lbs.**
Approx. dimensions (bench-top model) 22" L x 18" W x 12" H* 22" L x 18" W x 12" H**
Interface RS232 or RS 485, Analog Output, Discrete I/

*Wet pump options larger than 3.5 CFM mounted externally. Weight and dimensions available upon request.

**Dry weight and dimensions do not include roughing pump. Dry pump mounted externally.

**Spare parts are non refundable and non returnable. Approximate 1-4 week lead time if unavailable in our inventory. Manufacturer lead times may vary.


Related Items